• Modelagem e simulação de hidrociclone para reutilização de óleo de encimagem  (Trabalho de conclusão de curso)

    Barros, Bruno Navarro; Lorencone, Mathias Bock; Silva, Tulio Coelho Albano da (2023)
    The textile industry stands as a cornerstone of the national economy and ranks as the second largest employer within the industrial transformation sector. However, despite its significant economic benefits, it faces ...
  • Estudo da reutilização do resíduo da erva-mate como agente antioxidante para produção de creme hidratante  (Trabalho de conclusão de curso)

    Barbosa, Aline Huaman; Teixeira, Laura Janjacomo Alcausa de Almeida; Santos, Giulia Pereira; Kauffman, Amalia (2023)
    In 2021, 558 thousand tons of yerba mate were produced in Brazil, representing a growth rate of 8.7 %, driven by increased consumption in the country. Due to the high biodegradability of the plant, options for reuse are ...
  • Aproveitamento de resíduos agroindustriais para a produção de biocelulose e energia  (Trabalho de conclusão de curso)

    Chiapa, Filipe Alves; Guelfi, Gabriella Haddad; Oliveira, Lucca Pistori Fontenele de (2023)
    This study evaluated the feasibility of using by-products/wastes from a sugar and alcohol production plant located in the interior of São Paulo as a substrate for the production of bacterial cellulose. Sugar cane molasses ...
  • Desenvolvimento de ração para peixes a base do inseto Hermetia Illucens  (Trabalho de conclusão de curso)

    Souza, Anna Beatriz Gissoni de; Barbosa, Felipe Sammarone Ferreira; Trimmel, Hugo Testi; Dantas, Joao Lucas Araujo (2023)
    Other ongoing research aims to minimize the impact of predatory fishing on ecosystems. The raw material for fish meal is derived from predatory fishing, which is a limited resource. Consequently, there is a growing interest ...
  • Aplicação dos conceitos de uma biorrefinaria a uma indústria de lacticínios: produção de energia renovável, projeto industrial e análise financeira  (Trabalho de conclusão de curso)

    Tavares, Arthur Gregorio Barbosa; Silveira, Leonardo Sakugawa da; Santos, Gabriel Forte dos; Huang, Ricardo (2023)
    The pursuit of sustainability integrates the United Nations' Agenda 2030 with its Sustainable Development Goals (SDGs). Therefore, wastewater reuse and the circularity of the economy are of extreme importance. For dairy ...
  • Desenvolvimento e caracterização de biocompósitos fúngicos para aplicação na indústria de embalagens  (Trabalho de conclusão de curso)

    Souza, Brenda Isabella Dias; Barelli, Clara Nogueira; Osato, Luiz Henrique Dalcin (2023)
    The objective of this work was the development and characterization of fungal biocomposites for use in the packaging industry, employing the fungi Trametes versicolor and Pleurotus ostreatus. In the first stage, it was ...
  • Produção de materiais avançados de micélio para uso na indústria têxtil  (Trabalho de conclusão de curso)

    Jachetto, Isabela; Taxweiler, Julio Cesar; Moraes, Luis Felipe Silva Lobo de; Curralo, Thiago Wissinieuski (2023)
    In this study, the researchers investigated the possibility of obtaining an advanced mycelium material (AMM) for use in the textile industry. They used three different fungi: Rhizopus, Trametes versicolor, and Pleurotus ...
  • Suplementação alimentar a partir de bagaço de malte.  (Trabalho de conclusão de curso)

    Miranda, Caroline Antunes de; Ferreira, Giovana Lourencao; Batista, Maria Fernanda Dionisio; Sanches, Victoria Machado Faria (2023)
    Brazil is the third largest beer producer in the world, with a composition that contains over 85% malt. Approximately 14 billion liters of beer were produced in 2022. The waste of malt husks is a significant concern, ...
  • Estudo de um verniz natural à base de goma laca indiana com a incorporação de nanopartículas de sílica e grafeno  (Trabalho de conclusão de curso)

    Cutrale, Beatriz Carvalho; Postigo, Enzo de Camargo; Lopez, Lucas Alessio; Delgadillo, Rafael Oroza (2023)
    Coating materials to protect them from degradation by external agents is one of the most common methods of preserving and improving their performance and aesthetic characteristics. In this context, synthetic varnishes are ...
  • Desenvolvimento de compósito utilizando matriz de polipropileno e reforço de fibra de milho  (Trabalho de conclusão de curso)

    Silva, Thiago Kelab Leite; Ferreira, Lucca Meurer; Hirata, Julio Kimio (2023)
    The study was carried out with the aim of developing a new composite material using residual corn straw from the agro-industry as a natural fiber to reinforce a synthetic polypropylene matrix. The work was inspired by the ...
  • Produção de um bioligante asfáltico utilizando lignina proveniente de biomassas descartadas  (Trabalho de conclusão de curso)

    Luders, Arthur Almeida; Munhoz, Fernanda Fernandes; Magnani, Gabriel Rossi; Godoy, Laura Rezende (2023)
    The concept of sustainable urbanization has been gaining ground in the market alongside the concerns about environmental impacts generated by inadequate waste disposal. The present study aims to apply lignin, extracted ...
  • Compósito de polipropileno com borra de café  (Trabalho de conclusão de curso)

    Bekis, Ana Carolina Morata; Freitas, Bruna Minosso de; Vergari, Camila Torloni; Domingues, Giovanna Meneghello (2023)
    Coffee is the second most consumed beverage in the world. In Brazil, coffee production has become the largest and is one of the country's biggest economic sources, followed by other commodities such as sugar, cotton ...
  • Reforma de etanol para produção de hidrogênio verde no Brasil  (Trabalho de conclusão de curso)

    Joao, Andre Chiorato; Paulo, Leonardo de Moraes; Ristori, Paulo Vaz Trivellato; Ramires, Pedro Vidal (2023)
    This study focuses on the analysis of green hydrogen production through simulations carried out in the Aspen Plus V11 software, exploring its applications in the contemporary context. The primary objective of this research ...
  • Análise e dimensionamento de um silenciador de escapamento para formula SAE  (Trabalho de conclusão de curso)

    Malandrino, Fabrizio Bompani; Viana, Eduardo Felipe Oliveira; Fiacador, Giulia de Souza; Neri, Rafael Monteiro (2023)
    The growing presence of noise pollution in the daily lives of the Brazilian population, especially from noise generated by internal combustion engines, makes it imperative to study ways of mitigating such disturbances. ...
  • Projeto conceitual de fonte de alimentação com operação em quatro quadrantes para utilização em futuros reatores de fusão nuclear.  (Trabalho de conclusão de curso)

    Campos, Gustavo Ribeiro; Souza, Guilherme Torres de; Zeigler, Guilherme Bernardelli (2023)
    The world's energy demand has steadily increased in recent years, bringing to the forefront increasingly relevant environmental issues in discussions associated with energy generation. One of the forms of generation ...
  • Influência do uso de nanofluidos em manufatura híbrida de peças de aço inox 316L  (Trabalho de conclusão de curso)

    Maiolini, Andre Solano Ferreira Rodrigues; Uchida, Gabriel Takehisa; Dias, Rogerio Caverzan; Gallego, Victor Lunardini (2023)
    Additive Manufacturing (AM) is one of the pillars of Industry 4.0, as it enables the production of complex geometries in an individualized and flexible manner. The surface quality and the level of residual stresses resulting ...
  • Dispositivo didático infantil para aprendizado da língua brasileira de sinais com redes neurais artificiais  (Trabalho de conclusão de curso)

    Burato, Artur; Franco, Ingrid Folles Bergamini; Rezende, Klaus Hilario Lambert; Daniel, Pedro Henrique Rodriguez (2023)
    Artificial Intelligence is becoming increasingly widespread in the routine of Brazilians, and even deeper studies of Artificial Neural Networks are being sponsored for the computational simulation of human cognitive capacity. ...
  • Sistema de Soft Robotics movimentado por sensores de estímulos musculares  (Trabalho de conclusão de curso)

    Dias, Luiza Carvalho; Navarro, Hernandez Barros; Cichini, Henrique Vicentini Gaspar (2023)
    The project consists of a hand prosthesis made from soft robotics with muscle sensors. Soft robotics uses malleable materials that, when filled with compressed air, can perform movements such as, for example, the extension ...
  • Antena de fenda para aplicações em micro-ondas de alta potência.  (Trabalho de conclusão de curso)

    Vasquez, Matheus Brandao; Aisemberg, Victor (2023)
    An antenna is a device capable of emitting and receiving electromagnetic waves. The antenna serves as an intermediate structure between free space and the wave-guiding device. The aim of this study is to design a microwave ...
  • Desenvolvimento de uma turbina eólica com rotor contra-rotativo e carenado: análise técnica e econômica  (Trabalho de conclusão de curso)

    Bekman, Felipe Paes; Franca Filho, Luciano da Silva; Loly, Vincenzo Trajano Roberto (2023)
    In order to limit the increase in average global temperature to 1.5°C, it will be necessary to triple the installed capacity of renewable energies by 2030, and wind energy is one of the most mature options for this objective. ...

View more